CEESC Extra Large Cat Door (Outer Size 11" X 9.8"), 4 Way Locking Large Cat Door

Description

☞4 WAY SWITCH MODE --- The pet door could be adjusted by the Red and Green switches with tabs to 4 modes: out only, in only, both in and out, and fully locked, easy control of your pet's in and out.
☞SIZE & APPLICATION --- Outer Size: 9.8" x 11" x 2.15"(W x H x D), Inner size: 7.9" x 8.7"(W x H), Cut-Out Size: 8.3" x 9.5" (W x H), suitable for installation on doors and thin walls, suitable for cat and doggie lighter than 27.54 lb and waist circumference shorter than 24.8"
☞SAFE & THOUGHTFUL --- The transparent flap let pet see through the door. Exterior rain seal is for waterproof. Brush strip eliminates noise from the door closing.
☞EASY TO INSTALL --- Complete instructions included, make you easily install in windows, doors, cupboards, panels and walls etc.
☞EXCELLENT QUALITY --- Made of ABS material, weather-resistant, the surface is smooth and durable.
Product Description
Extra Large Cat Door Specifications
Note:
Outer Size: 9.8" x 11" x 2.15"(W x H x D);
Inner size: 7.9" x 8.7"(W x H);
Cut-Out Size: 8.3" x 9.5" (W x H);
Fit Cats up to 25.54 lbs （The waistline less than 24.8" );
Material: ABS plastic
Color: White
Style: Flap
Weight: 1.19 lb
Make sure that the width and height(shoulder level) of the pet are inferior to the pet screen door, thanks.
The depth of door/wall/window you are going to install to had better more than the depth 2.17", so as to screw in 8 screws from both sides easily.
Package Includes of CEESC Extra Large Cat Door :
1 X Large Cat flap door
8 X Screws
8 X Screw caps
1 X Installation instructions
If the cat door is too thick for the door, please use scissors or cutting machine to cut along the line in the width of the frame.
Installion instructions
1. Draw outline on the paper board
Draw the cat door frame on a paper board and cut it down.
Note:
You had better prepare these necessary tools first, pencil, ruller, electric saw, drill, screwdriver, double-side tape.
2. Draw outline on the door
Use a pencil draw around the edge of the cut paper on the door you want to be fixed to.
Note:
Generally, average installation height is around 10-15 cm from the floor.
3. Drill 4 corners for holes
Drill 4 corners for thorough holes first with an electric drill.
4. Cut out a tunnel hole
Cut out the tunnel hole with an electric saw starting at holes drilled.
5. Put the cat door in the door
After the tunnel hole is cut out, it's better to wrap around it with a layer of wood skin. And if your hole is cutting a little big, it's quite neccessary.
6. Cut down tunnel depth if necessary
If the cat door is too thick for your door, use a scissors or cutting machine to cut down some part of tunnel along the line A or B. The cutting scale is about 2-4CM.
7. Mount to the door
Mount the cat door with double-side tape to the door. 8 screws have been provided for your use, tighten them with a screwdriver on both sides.
Note:
8 screws for 4 holes on both sides, screw them all in 2 sides as illustration shown above, please. These 8 screws are designed to work together, they are not short.
8. Done
Place screw caps over the screw holes, press them on. The installation is completely done.